In a particular event or at a time in the past, you might have noticed some sort of electrical problems at your home/company. Well, there are different ways that your electrical systems could go wrong – a poor wiring inside your home or the electrical system may be outdated or tripping circuit breakers.
Your safety is the main goal. If you are facing high bills, flickering lights and damaged appliances at your home/company, you can ensure the home circuit is not in a good working condition. Here are some common electrical wiring problems and their solutions.
Electrical Surges
Poor wiring or the damaged power lines or defective appliances in the house could cause electrical surges. The electrical surge is common and will not last for long. If there occurs a frequent surge, there is a chance for the equipment failure.
You need to check the device that connects to the home grid and try disconnecting the poor quality power boards or devices. If the surges don’t occur again, your problem is solved. If it is not, you must call an electrical solution provider, they can fix the issue.
Overloading
Sometimes you will have a light fixture with the bulb that has higher watts than the designed fixture. The heat from the bulb can melt the socket and the insulation present in wires of the fixture. This creates sparks that result in electrical fires. Even after the bulb is removed, the socket and the will be in danger.
It is always better to fit a bulb or any other fittings by staying within the wattage. If the fixtures are not marked with wattage, it is advisable to use a 60-watt bulb or even smaller ones.
Power drops and dips
Drops occur mainly because of the faulty power grip and the appliances that are connected to it. It also occurs when the grid you use is made of substandard material. If this is the case, it draws too much power when the power is on.
A shock from Junction box
The junction box is a complete mess with lots of wires that are interconnected. If it is left open, there is an increased chance of getting the shock from it. If the wires are not within the reach, less is the risk. Thus, always ensure it is properly covered with the screws provided.
Electric shocks
When the electricity is not properly used, it results in electrical shocks with a horrible experience. The chances of such electrical problems in old homes were quite high because the circuits fitted during older days. An electric shock happens when you switch on or off a device. The issue can either be with the appliance or the wiring. To check the issue, you can test with another device. But to be on the safer side, call for an electrical solution provider.
In some situations, troubleshooting by you will help solve the problem. But, what is best as the permanent solution is to let the repair done by an experienced electrical solution provider. In Kuwait, you need to ensure that the changes shall be in line with the regulations and guidelines. Therefore, it is always good to pick an experienced electrical solution provider like Advanced Services. They have the expertise in dealing with both the commercial and residential projects.
Sign a deal with advanced services for Electrical Annual Maintenance Contract (AMC)
When the problems are frequent or just an electrician can’t fix the solution, it is better to sign up for an electrical annual maintenance contract. By doing so you can avoid the hassle of meeting any unforeseen situations thus avoiding any potential dangers. Being an experienced electrical and plumbing solution provider in Kuwait, they have the best electrical annual Maintenance plans that suit your requirements and the company employs experienced certified professionals to carry out the job, therefore you can have a trouble-free life.